不吹不擂， vultr 东京实测

V2EX = way to explore

V2EX 是一个关于分享和探索的地方

现在注册

已注册用户请登录

这是一个创建于 3594 天前的主题，其中的信息可能已经有所发展或是发生改变。

运营商：上海电信百兆下行（请不要吐槽可怜的上行），非精品网
Speedtest

U2B 视频

ISP 测速

测试手段为前端 h2/TLS+后端 Squid 。

但又一个奇怪的问题，用 SS 测速度却偏慢，难道是新协议的优越性？？
开启 SS ：

这次测试并没有出现前段时间大家反映的因国人涌入而被玩坏的情况，带宽跑满，结果非常满意。

后记：出现两个问题供大家参考
1. 无法 ping 通主机 IP （刚部署时是可以的）， SSH 电信这边无法登陆，从 DO 的 VPS 直接 SSH 却通的，墙的可疑性很大。
2. V*P*N 手段全线失败，虽然连接上，但显示访问受限， tracert 到一暗黑节点就丢失了，怀疑 vultr 封锁。

ssh

vultr

可疑性

tracert

41 条回复 2015-12-20 20:35:54 +08:00

taresky

2015-12-18 18:13:48 +08:00

喷子不会信的，它们会说你在给电信洗地。

yexm0

2015-12-18 18:17:32 +08:00

这个时候只需要把祸甩给 ntt 就行了

d7101120120

2015-12-18 18:35:20 +08:00

NTT 线路确实时有问题，很多时候我从香港的 vps 去 ping 东京的 vultr 都延迟 100+，速度也奇慢，要知道以前我的移动直接 ping 也就 90 左右。

Slienc7

2015-12-18 18:59:34 +08:00

从上个月流量加倍之后有绕路问题，部分地区电信绕路美国，实测延迟 300ms+ ，近期不知。

gamexg

2015-12-18 19:07:55 +08:00 via Android

写了个 tls+http 代理，结果几分钟 443 端口就被封...

lelsetsuna

2015-12-18 19:25:13 +08:00

最近江苏电信到 conoha 的速度快了好多，晚高峰居然能看 720p 了。。。

datocp

2015-12-18 19:39:22 +08:00

嘿嘿，我可以说别高兴太早，苦日子还在后头吗。。。这个服务器我还一个月都没试用完了。今天先是体验到 1000mbps 的情况，然后今天好像倒霉的就是测试了一下 softether vpn client ，结果现在成这样了，这是这段时间的最恐怖体验，已经基本不可用状态。。。。。。。。。。。。。

哎，真的别高兴太早，我以前推荐的时候，别的朋友就说很慢，现在轮到我说慢了，垃圾电信。

2015.12.18 19:35:44 LOG3[291]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[291]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[295]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[295]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[297]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[297]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[299]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG3[293]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[299]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG5[293]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[290]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[290]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[292]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[292]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[296]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[296]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[298]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[298]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[300]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[300]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG3[294]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:44 LOG5[294]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:44 LOG5[301]: Service [server6] accepted connection from 127.0.0.1:9127
2015.12.18 19:35:44 LOG6[301]: s_connect: connecting xxx.xxx.xxx.xxx:80
2015.12.18 19:35:48 LOG6[288]: Read socket closed (readsocket)
2015.12.18 19:35:48 LOG6[288]: SSL_shutdown successfully sent close_notify alert
2015.12.18 19:35:48 LOG5[288]: Connection closed: 529 byte(s) sent to SSL, 185807 byte(s) sent to socket
2015.12.18 19:35:54 LOG3[301]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:35:54 LOG5[301]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:35:54 LOG5[302]: Service [server6] accepted connection from 127.0.0.1:9129
2015.12.18 19:35:54 LOG6[302]: s_connect: connecting xxx.xxx.xxx.xxx:80
2015.12.18 19:36:04 LOG3[302]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded
2015.12.18 19:36:04 LOG5[302]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2015.12.18 19:36:04 LOG5[303]: Service [server6] accepted connection from 127.0.0.1:9131

datocp

2015-12-18 19:40:41 +08:00

服务器端。。。。

2015.12.18 10:59:49 LOG3[20]: SSL_accept: Peer suddenly disconnected
2015.12.18 11:01:04 LOG3[21]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:01:09 LOG3[12]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:01:11 LOG3[15]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:01:11 LOG3[17]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:01:11 LOG3[18]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:01:11 LOG3[14]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:01:50 LOG3[23]: SSL_accept: Peer suddenly disconnected
2015.12.18 11:01:50 LOG3[24]: SSL_accept: Peer suddenly disconnected
2015.12.18 11:06:16 LOG3[32]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:06:16 LOG3[34]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:06:17 LOG3[33]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:06:17 LOG3[36]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:06:17 LOG3[28]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:06:17 LOG3[31]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:06:34 LOG3[56]: SSL_accept: Peer suddenly disconnected
2015.12.18 11:07:58 LOG3[50]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:07:58 LOG3[52]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:07:59 LOG3[53]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:10:22 LOG3[60]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:10:22 LOG3[65]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:10:39 LOG3[61]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:10:54 LOG3[66]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:10:55 LOG3[76]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:10:56 LOG3[78]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:11:55 LOG3[74]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:19:30 LOG4[ui]: Insecure file permissions on /da/ca/stunnel.pem
2015.12.18 11:21:08 LOG4[ui]: Insecure file permissions on /da/ca/stunnel.pem
2015.12.18 11:24:25 LOG3[0]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:24:31 LOG3[29]: Unexpected socket close (s_ssl_read)
2015.12.18 11:24:57 LOG3[5]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:24:57 LOG3[9]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:24:57 LOG3[6]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:24:57 LOG3[8]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:24:58 LOG3[4]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:24:59 LOG3[3]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:25:01 LOG3[7]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:25:27 LOG3[11]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:25:28 LOG3[12]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:26:27 LOG3[18]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:26:27 LOG3[19]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:26:29 LOG3[28]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:26:33 LOG3[15]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:26:34 LOG3[30]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:27:39 LOG3[31]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:07 LOG3[43]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:07 LOG3[38]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:07 LOG3[42]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:26 LOG3[44]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:46 LOG3[46]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:46 LOG3[48]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:46 LOG3[50]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:46 LOG3[49]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:28:55 LOG3[51]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:29:15 LOG3[55]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:29:30 LOG3[60]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:29:30 LOG3[59]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:33:32 LOG3[63]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:34:56 LOG3[64]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:34:56 LOG3[67]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:34:56 LOG3[70]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:34:56 LOG3[71]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:34:57 LOG3[66]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:35:01 LOG3[68]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:35:02 LOG3[72]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:35:07 LOG3[69]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:35:38 LOG3[86]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:35:42 LOG3[91]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:35:43 LOG3[74]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:36:17 LOG3[81]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:36:26 LOG3[79]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:36:26 LOG3[92]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:36:26 LOG3[77]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:36:41 LOG3[96]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:37:01 LOG3[102]: s_connect: s_poll_wait 23.251.96.136:80: TIMEOUTconnect exceeded
2015.12.18 11:37:02 LOG3[103]: s_connect: s_poll_wait 23.251.96.136:80: TIMEOUTconnect exceeded
2015.12.18 11:37:03 LOG3[104]: s_connect: s_poll_wait 23.251.96.136:80: TIMEOUTconnect exceeded
2015.12.18 11:38:24 LOG3[114]: Unexpected socket close (s_ssl_read)
2015.12.18 11:38:54 LOG3[106]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:38:55 LOG3[108]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:38:55 LOG3[107]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:38:57 LOG3[109]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:39:01 LOG3[105]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:39:01 LOG3[102]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:39:02 LOG3[103]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing
2015.12.18 11:39:42 LOG3[101]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing

datocp

2015-12-18 19:45:55 +08:00

哎，中国的网络管制真是无法无天，从中间两边断开。太他妈无法无天了，还天天依法制国，制你妹。

wm5d8b

2015-12-18 20:07:43 +08:00 via Android

h2 指的是 HTTP/2 ？

Halry

2015-12-18 20:09:31 +08:00 via Android

反正我是怕了，换了 hk 的 softlayer

shoaly

2015-12-18 20:21:29 +08:00

@yexm0 这是什么软件的截图, 还自带地图的

Andy1999

2015-12-18 20:26:46 +08:00

拿腾讯云服务器挂了 SS 跑的
本地跑不上 100W 有点坑

ryd994

2015-12-18 20:29:47 +08:00

你是 nginx 直接 proxy_pass 给 squid 的么？ https 的网页是怎么处理的呢？就是 CONNECT 请求

miyuki

2015-12-18 20:34:03 +08:00

po 主可以分享下 http/2 代理配置教程吗

dangge

2015-12-18 20:44:42 +08:00

@yexm0 可以分享一下软件名吗?

yexm0

2015-12-18 20:45:58 +08:00

@shoaly @dangge
下面链接里面的 WINDOWS 版客户端就是了
https://www.ipip.net/download.html

datocp

2015-12-18 21:16:19 +08:00

晚上 21 ： 14 分的。。。为什么什么样的 vps 都没什么惊喜，也许还没入电信黑名单吧。。。这还是锐速加速过后的。。。

aec4d

2015-12-18 21:17:24 +08:00

@ryd994 @miyuki
https://gist.github.com/Ficapy/a70d5d05a9a216163dd3

datocp

2015-12-18 21:32:34 +08:00

Quaintjade

2015-12-18 22:44:37 +08:00

上海电信 50M/10M 家庭宽带，测速对象： Vultr 东京官方测速文件
测试结果：最高也就 1Mbps 多些
http://image17.poco.cn/mypoco/myphoto/20151218/22/5657397520151218223733078.png

网卡显示 Hyper-V 虚拟网卡是因为装了 Hyper-V 改了桥接，测速的是母系统，不影响速度。
http://image17.poco.cn/mypoco/myphoto/20151218/22/5657397520151218224206033.png

Quaintjade

2015-12-18 22:45:37 +08:00

@taresky 唯独你没资格说，呵呵，上次打脸还不够？

blessme

2015-12-19 01:46:00 +08:00

Vultr JP ，广东电信是先绕道美国然后再去日本，所以还不如洛杉矶的好。

cevincheung

2015-12-19 02:03:53 +08:00

@Andy1999 腾讯可以看油管？

Andy1999

2015-12-19 02:06:46 +08:00 via iPhone

@cevincheung 句子读清楚

cevincheung

2015-12-19 05:38:03 +08:00

@Andy1999 好吧，以为是 qcloud 做 ss-server

kj54321

2015-12-19 10:25:50 +08:00

@wm5d8b 是的， HTTP2

kj54321

2015-12-19 10:28:09 +08:00

@ryd994 我用的是 nghttp2, nginx 至今无法做 https 正向代理, 详情参考菊苣博文： https://wzyboy.im/post/1052.html

airycanon

2015-12-19 10:30:00 +08:00

@lelsetsuna conoha 解析 fonts.googleapis.com 没问题么？

kj54321

2015-12-19 10:39:32 +08:00

@aec4d 有脚本就是爽脆， el6 上编译安装的苦只有自己知道。

kj54321

2015-12-19 10:44:08 +08:00

@airycanon 萌妹解析 googleapi/fonts/ads/analysis 的确有问题,要自己指定 dns

airycanon

2015-12-19 12:55:11 +08:00

@kj54321 求指点，如何配置 dns 。

21grams

2015-12-19 12:56:15 +08:00

然并卵，你能稳定用上三个月再说。

datocp

2015-12-19 13:37:13 +08:00

conoha z.com 的 dns 都是比较怪的，说不出来的问题在哪，比如使用 google 显示的是上海广州，也不知道用了什么黑科技，最终发现使用 8.8.x.x 也是有问题的，干脆就使用美国的 dns 服务器。自己 apt-get install dnsmasq ，然后 vi /etc/dnsmasq.conf,service dnsmasq restart 就差不多了。检验 nslookup fonts.googleapis.com ，如果不成功可以尝试 vi /etc/resolv.conf 写入 nameserver 127.0.0.1 ，给 chattr +i /etc/resolv.conf,取消只读 chattr -i /etc/resolv.conf

dnsmasq.conf
#no-resolv
server=4.2.2.1
server=4.2.2.2
#server=8.8.4.4
#server=8.8.8.8
#address=/fonts.googleapis.com/74.125.196.95
server=/fonts.googleapis.com/4.2.2.1