Win10 多个 IPV6 地址源地址的选择还是搞不明白，求指点！

默认情况下，Win10 获取到 ipv6 前缀后，生成一个临时和一个公用地址，先禁用临时地址 netsh interface ipv6 set privacy state=disable 。

这时 Win10 有一个公用 ipv6 地址 2408:xxxx:xxxx:xxxx:a:b:c:d ；手动指定一个 IPV6 地址 2408:xxxx:xxxx:xxxx::9
现在虽然 win10 有了 2 个 ipv6 地址，一个公用，一个手动，但是 win10 默认使用公用 ipv6 为源地址通讯，希望是用手动 ipv6 地址作为源地址。

搜索知道这个源地址选择受 RFC3484 控制，规则有 8 条；
Rule 1: 优选与目标地址相同的地址
Rule 2: 优选其 scope 与目标地址 scope 相比更接近且 scope 更大的地址
Rule 3: 优选"preferred" 地址
Rule 4: 优选 home 地址
Rule 5: 优选和路由出口在同一块网卡上配置的地址
Rule 6: 优选 Label 匹配的地址
Rule 7: 优选非临时/临时地址(可配置)
Rule 8: 优选和目标地址最长前缀匹配的地址


在当前情况下规则 1 不适用；
规则 2 没看太明白，scope 应该是范围的意思吧？感觉当前情况下，同前缀的 2 个 ipv6 地址范围应该是一样的吧？
规则 3 ，两个地址都是首选地址，应该是一样的；
规则 4 ，优选 home 地址 我查了很久也没明白啥是 home 地址？

英文规范里貌似说这是移动设备的？

1. Introduction

The IPv6 addressing architecture [1] allows multiple unicast
addresses to be assigned to interfaces. These addresses may have
different reachability scopes (link-local, site-local, or global).
These addresses may also be "preferred" or "deprecated" [2]. Privacy
considerations have introduced the concepts of "public addresses" and
"temporary addresses" [3]. The mobility architecture introduces
"home addresses" and "care-of addresses" [8]. In addition, multi-
homing situations will result in more addresses per node. For
example, a node may have multiple interfaces, some of them tunnels or
virtual interfaces, or a site may have multiple ISP attachments with
a global prefix per ISP.

The end result is that IPv6 implementations will very often be faced
with multiple possible source and destination addresses when
initiating communication. It is desirable to have default

3.5. Mobility Addresses

Some nodes may support mobility using the concepts of a home address
and a care-of address (for example see [8]). Conceptually, a home
address is an IP address assigned to a mobile node and used as the
permanent address of the mobile node. A care-of address is an IP
address associated with a mobile node while visiting a foreign link.
When a mobile node is on its home link, it may have an address that
is simultaneously a home address and a care-of address.

For the purposes of this document, it is sufficient to know whether
or not one's own addresses are designated as home addresses or care-
of addresses. Whether or not an address should be designated a home
address or care-of address is outside the scope of this document.

还给了例子
Destination: 2001::1
Candidate Source Addresses: 2001::2 (care-of address) or 3ffe::2
(home address)
Result: 3ffe::2 (prefer home address)

Destination: 2002:836b:2179::1
Candidate Source Addresses: 2002:836b:2179::d5e3:7953:13eb:22e8
(temporary) or 2001::2
Result: 2002:836b:2179::d5e3:7953:13eb:22e8 (prefer matching label)

Destination: 2001::d5e3:0:0:1
Candidate Source Addresses: 2001::2 or 2001::d5e3:7953:13eb:22e8
(temporary)
Result: 2001::2 (prefer public address)


规则 5: 优选和路由出口在同一块网卡上配置的地址，这都是一个网卡上的地址，应该一样；

规则 6: 优选 Label 匹配的地址
网上搜索的信息，貌似都是在这个上做文章

netsh interface ipv6 show prefixpolicies 显示

优先顺序 标签 前缀
---------- ----- --------------------------------
50 0 ::1/128
45 1 2408:821b:2221:6dd0::9/128
40 1 ::/0
35 4 ::ffff:0:0/96
30 2 2002::/16
5 5 2001::/32
3 13 fc00::/7
1 3 ::/96
1 12 3ffe::/16
1 11 fec0::/10

手动添加一个 netsh interface ipv6 add prefixpolicy prefix=2408:xxxx:xxxx:xxxx::9/128 precedence=45 label=1 store=persistent

理论上同 label 应该优先
实际上这规则不生效，win10 还是使用公用 ipv6 地址作为源地址

规则 7 ，已经禁用了临时地址，这个不适用吧？
规则 8 优选和目标地址最长前缀匹配的地址
这两个 ipv6 地址应该是一样的前缀

研究了半天，一头雾水，不知道怎么搞，主要是我英文还是太差……

PS：看到有人用 netsh interface ipv6 set interface "WLAN" routerdiscovery=disable store=persistent
禁用 ipv6 自动配置，这样就只剩下我们配置的手动 ipv6 地址，这样确实能够实现使用手动 ipv6 地址的目的，但是上有 ipv6 前缀变化的时候，win10 也就感知不到了，还是不完美，所以没用这个。

求高人指点！