snipes

@aru 嗯，这样是可以的，可能是 FRP 安装脚本的问题，用那个脚本装，/usr/bin/frps 就是一个软链接。谢了。

@NessajCN
另外，我运行 file /usr/bin/frps
得到这个
/usr/bin/frps: symbolic link to /etc/init.d/frps

@NessajCN

第一个命令
ls /usr/local/frps
enable enable.20250409-000000 frps frps.toml

第二个命令
cat /usr/local/frps/frps.toml

bindAddr = "0.0.0.0"
bindPort = 5443

# udp port used for kcp protocol, it can be same with 'bindPort'.
# if not set, kcp is disabled in frps.
kcpBindPort = 5443

# udp port used for quic protocol.
# if not set, quic is disabled in frps.
quicBindPort = 8443

# Specify which address proxy will listen for, default value is same with bindAddr
# proxyBindAddr = "127.0.0.1"

# quic protocol options
# transport.quic.keepalivePeriod = 10
# transport.quic.maxIdleTimeout = 30
# transport.quic.maxIncomingStreams = 100000

# Heartbeat configure, it's not recommended to modify the default value
# The default value of heartbeatTimeout is 90. Set negative value to disable it.
transport.heartbeatTimeout = 90

# Pool count in each proxy will keep no more than maxPoolCount.
transport.maxPoolCount = 5

# If tcp stream multiplexing is used, default is true
transport.tcpMux = true

# Specify keep alive interval for tcp mux.
# only valid if tcpMux is true.
# transport.tcpMuxKeepaliveInterval = 30

# tcpKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
# If negative, keep-alive probes are disabled.
# transport.tcpKeepalive = 7200

# transport.tls.force specifies whether to only accept TLS-encrypted connections. By default, the value is false.
# transport.tls.force = false

# transport.tls.certFile = "server.crt"
# transport.tls.keyFile = "server.key"
# transport.tls.trustedCaFile = "ca.crt"

# If you want to support virtual host, you must set the http port for listening (optional)
# Note: http port and https port can be same with bindPort
vhostHTTPPort = 8080
vhostHTTPSPort = 8443

# Response header timeout(seconds) for vhost http server, default is 60s
# vhostHTTPTimeout = 60

# tcpmuxHTTPConnectPort specifies the port that the server listens for TCP
# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
# requests on one single port. If it's not - it will listen on this value for
# HTTP CONNECT requests. By default, this value is 0.
# tcpmuxHTTPCOnnectPort= 1337

# If tcpmuxPassthrough is true, frps won't do any update on traffic.
# tcpmuxPassthrough = false

# Configure the web server to enable the dashboard for frps.
# dashboard is available only if webServerport is set.
webServer.addr = "0.0.0.0"
webServer.port = 6443
webServer.user = "admin"
webServer.password = "lokithor4123"
# webServer.tls.certFile = "server.crt"
# webServer.tls.keyFile = "server.key"
# dashboard assets directory(only for debug mode)
# webServer.assetsDir = "./static"

# Enable golang pprof handlers in dashboard listener.
# Dashboard port must be set first
# webServer.pprofEnable = false

# enablePrometheus will export prometheus metrics on webServer in /metrics api.
# enablePrometheus = true

# console or real logFile path like ./frps.log
log.to = "enable"
# trace, debug, info, warn, error
log.level = "info"
log.maxDays = 3
# disable log colors when log.to is console, default is false
# log.disablePrintColor = false

# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
# detailedErrorsToClient = true

# auth.method specifies what authentication method to use authenticate frpc with frps.
# If "token" is specified - token will be read into login message.
# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
auth.method = "token"

# auth.additionalScopes specifies additional scopes to include authentication information.
# Optional values are HeartBeats, NewWorkConns.
# auth.additiOnalScopes= ["HeartBeats", "NewWorkConns"]

# auth token
auth.token = "6vMltzpz9E9ulEgi"

# userConnTimeout specifies the maximum time to wait for a work connection.
# userCOnnTimeout= 10

# Max ports can be used for each client, default value is 0 means no limit
# maxPortsPerClient = 0

# If subDomainHost is not empty, you can set subdomain when type is http or https in frpc's configure file
# When subdomain is test, the host used by routing is test.frps.com
subDomainHost = "20.198.220.105"

# custom 404 page for HTTP requests
# custom404Page = "/path/to/404.html"

# specify udp packet size, unit is byte. If not set, the default value is 1500.
# This parameter should be same between client and server.
# It affects the udp and sudp proxy.
# udpPacketSize = 1500

# Retention time for NAT hole pnching strategy data.
# natholeAnalysisDataReserveHours = 168

# ssh tunnel gateway
# If you want to enable this feature, the bindPort parameter is required, while others are optional.
# By default, this feature is disabled. It will be enabled if bindPort is greater than 0.
# sshTunnelGateway.bindPort = 2200
# sshTunnelGateway.privateKeyFile = "/home/frp-user/.ssh/id_rsa"
# sshTunnelGateway.autoGenPrivateKeyPath = ""
# sshTunnelGateway.authorizedKeysFile = "/home/frp-user/.ssh/authorized_keys"

@aru
运行完这个/usr/bin/frps -c /usr/local/frps/frps.toml ，系统直接用 vi 打开了 frps.toml 配置文件。

多写。

土著有房无贷，够花就行。
否则的话，努力提高技术跳槽吧。

我之前是裸辞的，写了个 letter 说了下为什么辞职还没找工作，澳洲旅游签证也过了。

dota2 天天炸

好好提高自己吧，焦虑并不能改变什么：（